Equipment

  • CNC Trumpf CO2 laser cutting machine (5000 Watt)

  • for sheets with dimensions of 3000 x 1500 mm
  • laser work on steel sheets with thicknesses up to 25 mm
  • laser work on stainless steel with thicknesses up to 15 mm
  • the machine is equipped with an automatic ‘Liftmaster’ sheet infeed and outfeed system
  • machine can manufacture in a largely automated way
  • 2nd CNC Trumpf CO2 laser cutting machine(5000 Watt)

  • for sheets with dimensions of 3000 x 1500 mm
  • laser work on steel sheets with thicknesses up to 25 mm
  • laser work on stainless steel with thicknesses up to 15 mm
  • the machine is equipped with an automatic ‘Liftmaster’ sheet infeed and outfeed system
  • machine can manufacture in a largely automated way using a tower with 15 grills filled with serval sheet sizes and remnants
  • Lissmac 

  • deburring machine for oxide removal, deburring and edge rounding
  • for sheets with dimensions of  1500 mm with thicknesses up to 15 mm
  • bottom and top sanding in one pass
  • one machine for processing stainless steel and one machine for processing steel
  • 2 off Q-Fin deburring machine

  • deburring machine for deburring and edge rounding of small workpieces with a width up to 200 mm
  • equiped with a vaccuum system with a 2.2 kW pump
  • one machine for processing stainless steel and one machine for processing steel
  • Hydraulic guillotine shear

  • make SAFAN, type HVR310-10TS
  • for cutting sheets with thicknesses from 1 to 10 mm and with a maximum width of 3100 mm
  • Hydraulic Trumpf Trumabend 5230 press brake

  • for bending containers, profiles, open boxes, etc. up to a thickness of  +10 mm
  • equipped with NC back gauges and depth adjustment with Easy-form angle measuring system
  • capacity of 230 tons
  • maximum working length of  4050 mm
  • distance between side frames  3550 mm
  • equipped with a wide range of tools
  • machine equipped with 2 bending aids for large pieces.
  • Hydraulic LVD Easyform 170/42 press brake

  • for bending containers, profiles, open boxes, etc. 
  • equipped with Easyform angle measuring system
  • capacity of 170 tonnes
  • maximum working length of 4200 mm
  • equipped with a wide range of tools
  • Hydraulic LVD Easyform 135/30 press brake

  • for bending containers, profiles, open boxes, etc. 
  • equipped with Easyform angle measuring system
  • capacity of 130 tons
  • maximum working length of 3000 mm
  • equipped with a wide range of tools
  • Hydraulic LVD Easyform 85/25 press brake

  • for bending containers, profiles, open boxes, etc. 
  • equipped with Easyform angle measuring system
  • capacity of 85 tons
  • maximum working length of 2500 mm
  • equipped with a wide range of tools
  • Hydraulic Trumpf Trumabend V85 press brake

  • for bending containers, profiles, open boxes, etc. 
  • equipped with NC back gauges and depth adjustment with ACB angle measuring system
  • capacity of 85 tonnes
  • maximum working length of 2000 mm
  • equipped with a wide range of tools
  • Hydraulic notching/punching machine

  • make Boschert, type LB15-KS6-25
  • for notching sheets with maximum dimensions of 250 x 250 mm
  • capacity of 12.5 tons
  • maximum sheet thickness for St.37 is 6 mm
  • Large sheet roller

  • for rolling shells (and similar) for silos, boilers, tanks, etc.
  • length of 2500 mm
  • the minimum diameter is 300 mm and the maximum sheet thickness is 10 mm
  • Small sheet roller

  • length of 1020 mm
  • the minimum diameter is 100 mm and the maximum sheet thickness is 2 mm
  • Small sheet roller

  • length of 1540 mm
  • the minimum diameter is 100 mm and the maximum sheet thickness is 2 mm
  • Spot welding machine

  • capacity of 2 layers of 3 mm steel
  • MAZAK 3D FABRI GEAR 220 II 4kW profile laser-cutting machine

  • for profiles with maximum dimensions of diameter 220, 160x160 or 200x100mm
  • max. wall thickness Fe 15 mm, stainless steel 10 mm
  • the machine is equipped with an automatic profile infeed and outfeed system
  • maximum profile length 8000 mm
  • machine can manufacture in a largely automated way
  • Sawmill

  • Trennjäger PMC-12 circular saw
  • Kaltenbach KKS 400 NA automatic saw with NC back gauge, accurate to 0.1 mm
  • Kasto EBS-32-OU hacksaw
  • equipped with infeed and outfeed roller conveyor
  • the maximum profile cross-section that can be sawn is 1000 x 300 mm
  • also for sawing mitre cuts
  • Electro-hydraulische profielijzer walsmachine

  • type R3 fabrikaat Roundo
  • machine voor het walsen van flenzen, ringen etc. voor profielijzer en gezette plaatwerkproducten
  • Electro-hydraulic profiled iron rolling machine

  • type R3, make Roundo
  • machine for rolling flanges, rings, etc. for profiled iron and bent sheet-metal products
  • Column, radial and bench drilling machines

  • Welding machines, MIG equipment incl. pulse and TIG equipment

  • with or without transistor control
  • Profile and pipe-bending machine

  • make Stierli 300 HE
  • for bending strips up to a maximum of 200 x 15 mm and pipes up to 2”
  • CNC turning center

  • MAZAK Quick Turn Nexus 350-II M
  • max. machining diameter: Ø420 mm
  • max. machining length: 1500 mm
  • maximum bar work capacity Ø102mm
  • 12 tools
  • CNC programmable tailstock
  • CNC turning center

  • MAZAK Quick Turn Nexus 250 M
  • max. machining diameter: Ø380 mm
  • max. machining length: 1000 mm
  • maximum bar work capacity Ø77mm
  • 12 tools
  • CNC programmable tailstock
  • CNC turning center

  • Weiler E70 (teach-in)
  • max. machining diameter: Ø430 mm
  • max. swing diameter over bed: Ø720 mm
  • max. machining length: 2000 mm
  • maximum bar work capacity Ø107mm
  • 8 tools
  • CNC programmable tailstock
  • CNC milling machine

  • MAZAK type VTC300C2
  • X axis 1740 mm
  • Y axis 760 mm
  • Z axis 660 mm
  • table size 2000 x 760 mm
  • controlled 4th axis
  • 48 tools in magazine
  • equipped with partition for independent product adjustment
  • CNC milling machine

  • MAZAK type VTC200C2
  • X axis 1660 mm
  • Y axis 510 mm
  • Z axis 560 mm
  • table size 2000 x 510 mm
  • controlled 4th axis
  • 30 tools in magazine
  • equipped with partition for independent product adjustment
  • TOS F95 32/40T milling machine

  • the table size is 1000 x 300 mm
  • the maximum table load is 500 kg
  • TOS SUI 50 lathe

  • the maximum turning diameter is 500 t.d.c. 2000 mm
  • Static balancing machine

  • for the static balancing of rollers
  • Hydraulic press

  • for cutting keyways up to an axis diameter of 90 mm
  • works by means of ‘broaching’
  • capacity of 12 tons

View our work environment in 360°

Lasafdeling staal
Lasafdeling RVS
Magazijn
Verspaning
Afkantpersen
Lasersnijmachine
Buis/profiel lasersnijmachine
Assemblage