After parts have been cut using our laser cutting machines, we bend them – or carry out edge finishing and bevelling – using our deburring machines, press brakes and folding machines.
Deburring machines
2 x Lissmac
- For oxide removal, deburring and edge rounding
- Capacity of width 1500 mm, maximum thickness 15 mm
- Bottom and top sanding in one pass
- One machine for stainless steel/one machine for steel
2 x Q-Fin
- Deburring machine for deburring and edge rounding of materials measuring 20 x 20 mm and up to 200 mm wide.
- With wet-operating extractor
- One machine for stainless steel/one machine for steel
Press brakes
- Hydraulic Trumpf Trumabend 5230
- For bending containers, profiles, open boxes, etc.
- Equipped with NC-controlled backgauges and depth adjustment with Easy-Form angle measurement system
- Capacity of 230 tons
- Maximum working length of 4050 mm
- Distance between uprights 3550 mm
- Equipped with a wide range of tools
- Machine equipped with 2 bending aids for large workpieces.
Hydraulic Trumpf press brake Trumabend V85
- For bending containers, profiles, open boxes, etc.
- Equipped with NC-controlled backgauges and depth adjustment with ACB angle measurement system
- Capacity of 85 tons
- Maximum working length of 2000 mm
- Equipped with a wide range of tools
Hydraulic LVD press brake LVD 170/42
- For bending containers, profiles, open boxes, etc.
- Equipped with the Easy-Form angle measuring system.
- Touch-B controller, a graphic, pictogram-based touchscreen control system.
- Capacity of 170 tons
- Maximum working length of 4200 mm
- Equipped with a wide range of tools
Hydraulic LVD press brake LVD 135/30
- For bending containers, profiles, open boxes, etc.
- Equipped with the Easy-Form angle measuring system.
- Touch-B controller, a graphic, pictogram-based touchscreen control system.
- Capacity of 130 tons
- Maximum working length of 3000 mm
- Equipped with a wide range of tools
Hydraulic LVD press brake LVD 85/25
- For bending containers, profiles, open boxes, etc.
- Equipped with the Easy-Form angle measuring system.
- Touch-B controller, a graphic, pictogram-based touchscreen control system.
- Capacity of 85 tons
- Maximum working length of 2500 mm
- Equipped with a wide range of tools
Hydraulic notching/punching machine
Boschert, type LB15-KS6-25
- For notching sheets with maximum dimensions of 250 x 250 mm
- Capacity of 12.5 tons
- Maximum sheet thickness for St.37 is 6 mm
Large sheet roller
- For rolling shells and suchlike for silos, boilers, tanks, etc.
- Length of 2500 mm
- The minimum diameter is 300 mm and the maximum sheet thickness is 10 mm
Small sheet roller
- Working width of 1020 mm
- The minimum diameter is 150 mm and the maximum sheet thickness is 2mm
Small sheet roller
- Length of 1540 mm
- The minimum diameter is 100 mm and the maximum sheet thickness is 4 mm
