Press brakes and rollers

Drag/Swipe to see more

Press brakes and rollers

After parts have been cut using our laser cutting machines, we bend them – or carry out edge finishing and bevelling – using our deburring machines, press brakes and folding machines. 

Deburring machines

2 x Lissmac

  • For oxide removal, deburring and edge rounding
  • Capacity of width 1500 mm, maximum thickness 15 mm
  • Bottom and top sanding in one pass
  • One machine for stainless steel/one machine for steel

2 x Q-Fin 

  • Deburring machine for deburring and edge rounding of materials measuring 20 x 20 mm and up to 200 mm wide.
  • With wet-operating extractor
  • One machine for stainless steel/one machine for steel

Press brakes

  • Hydraulic Trumpf Trumabend 5230
  • For bending containers, profiles, open boxes, etc.
  • Equipped with NC-controlled backgauges and depth adjustment with Easy-Form angle measurement system
  • Capacity of 230 tons
  • Maximum working length of 4050 mm
  • Distance between uprights 3550 mm
  • Equipped with a wide range of tools
  • Machine equipped with 2 bending aids for large workpieces.

Hydraulic Trumpf press brake Trumabend V85

  • For bending containers, profiles, open boxes, etc. 
  • Equipped with NC-controlled backgauges and depth adjustment with ACB angle measurement system
  • Capacity of 85 tons
  • Maximum working length of 2000 mm
  • Equipped with a wide range of tools

Hydraulic LVD press brake LVD 170/42 

  • For bending containers, profiles, open boxes, etc. 
  • Equipped with the Easy-Form angle measuring system.
  • Touch-B controller, a graphic, pictogram-based touchscreen control system.
  • Capacity of 170 tons
  • Maximum working length of 4200 mm
  • Equipped with a wide range of tools

Hydraulic LVD press brake LVD 135/30 

  • For bending containers, profiles, open boxes, etc. 
  • Equipped with the Easy-Form angle measuring system.
  • Touch-B controller, a graphic, pictogram-based touchscreen control system.
  • Capacity of 130 tons
  • Maximum working length of 3000 mm
  • Equipped with a wide range of tools

Hydraulic LVD press brake LVD 85/25

  • For bending containers, profiles, open boxes, etc. 
  • Equipped with the Easy-Form angle measuring system.
  • Touch-B controller, a graphic, pictogram-based touchscreen control system.
  • Capacity of 85 tons 
  • Maximum working length of 2500 mm
  • Equipped with a wide range of tools

Hydraulic notching/punching machine

Boschert, type LB15-KS6-25

  • For notching sheets with maximum dimensions of 250 x 250 mm
  • Capacity of 12.5 tons
  • Maximum sheet thickness for St.37 is 6 mm

Large sheet roller

  • For rolling shells and suchlike for silos, boilers, tanks, etc.
  • Length of 2500 mm
  • The minimum diameter is 300 mm and the maximum sheet thickness is 10 mm

Small sheet roller

  • Working width of 1020 mm
  • The minimum diameter is 150 mm and the maximum sheet thickness is 2mm

Small sheet roller

  • Length of 1540 mm
  • The minimum diameter is 100 mm and the maximum sheet thickness is 4 mm